5/1/2023 0 Comments Dahua ip configThe article below is a step-by-step guide on how to manually change the IP addresses of Dahua cameras. Change each cameras IP address to the same range as the NVR POE Switch or for non-POE NVRs the same range as the Ethernet port the. Run the IPC Tool Software on the PC/Laptop. Connect PC/Laptop to NVR or Switch POE port. Connect camera to POE Port of NVR or Switch. One of the primary rules to networking is that no two devices on the same network can have the same IP address, as this will cause a collision. Connecting IRLAB Cameras to Dahua IP NVRs. The problem is that it is your responsibility to change the default camera IP address to something unique. You will generally bring the cameras in by connecting a switch to the second LAN port of the NVR and then connecting the cameras to that switch. Now where things can get tricky is when you are using an NVR that has 32 channels or more, the reason for this is because there are no on-board camera ports. All you have to do is plug the camera into the camera ports on the NVR and through the magic of the DHCP protocol the IP address is automatically assigned to one that the NVR can see. To begin, when using a Dahua camera with a 4,8,16, or 24 channel NVR such as those that come in kits. One of the most common questions that I get regarding Dahua cameras is how to change the IP address.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |